Install Basement Well
backstagewithkim.com -Install Basement Well This installation was done on an existing building that had water seeping through the joint between the basement window and foundation, but the steps apply to new construction, as well. Set the elevation. The top of the window well should be at least 2 to 3 inches above finished grade if possible.
Install Basement Well ement window wells. Basement window wells let extra light into dark basements. You can install basement window wells by following the directions below. Step 1 - Plan Your Basement Window
How to install basement windows and satisfy egress codes .... Step 1: Make sure existing gutters and downspouts are clean and drain water away from the house. If necessary, install new gutters. Step 2: Check the grade of the slope around your foundation walls. It should be 1/2 in. per foot at least 10 to 12 ft. out from the foundation wall.
How to install a window well: 9 steps (with pictures .... Consult your product for proper window well installation after Step 4. Drill into the foundation at the spots marked. Secure the window well to the foundation with bolts. Fill the bottom of the well and the perimeter between the well and the edge of your hole with a few inches (or 10 cm) of gravel.
Boman Kemp Window Well Grates, Extended Light Well Basement Door, Window Well Covers, Basement Egress Well, Basement Egress, Install Basement Well, Basement Egress Window Covers, Window Wells for Basement Windows